#
# mgetty configuration file
#
# this is a sample configuration file, see mgetty.info for details
#
# comment lines start with a "#", empty lines are ignored


# ----- global section -----
#
# In this section, you put the global defaults, per-port stuff is below


# set the global debug level (5 is quite verbose)
debug 1

# set the local fax station id
fax-id (+61 3) 9434 4615

# access the modem(s) with 38400 bps
speed 38400
# speed 19200

# the /dev/tty-device is owned by uucp.uucp and mode "rw-rw-r--" (664)
port-owner root
port-group dialout
port-mode 0664

# incoming faxes are owned by "root.fax" and mode "rw-rw----" (660)
fax-owner root
fax-group fax
fax-mode 0660


# ----- port specific section -----
# 
# Here you can put things that are valid only for one line, not the others
#

# Zoom V.FX 28.8, connected to ttyS0: don't do fax, less logging
#
#port ttyS0
#  debug 5
#  speed 38400
#  switchbd 19200

port modem
  debug 5
  speed 38400
  switchbd 38400
#  switchbd 19200
#  init-chat "" \d\d\d+++\d\d\dATS0=0V1 OK 
#  data-only y

# ZyXEL 2864, connected to ttyS1: maximum debugging, grab statistics
#
#port ttyS1
#  debug 8
#  init-chat "" \d\d\d+++\d\d\dAT&FS2=255 OK ATN3S0=0S13.2=1 OK 
#  statistics-chat "" AT OK ATI2 OK
#  statistics-file /tmp/statistics.2864
#  modem-type cls2

# direct connection of a VT100 terminal which doesn't like DTR drops
#
#port ttyS2
#  direct y
#  speed 19200
#  dtr-toggle n